Where do i find a good paint for my laser sailboat? - laser sailboat
I bought a laser, old last summer, and I noticed a hole, but again I need to paint to make the quality of the breed. What color do I have to do with it, and where can I buy?
PS I took a syringe and a compressor for this process to be used. Any help is welcome.
Saturday, December 5, 2009
Laser Sailboat Where Do I Find A Good Paint For My Laser Sailboat?
2 comments:
Any Shipping offer the best picture of your boat.
I have gel coat the sand.
Removed with a grinder with a grinding wheel, the spider cracks in the gelcoat fiberglass and filled them with Interlux Watertite filling.
Wash and dry after each grinding at the surface with water, can and remove remaining dust with Interlux Solvent Wash
The first step is the first (2-3 layers) and painting (2-3 layers) between the waterline and the rail. Sanding between coats.
I use Interlux Pre toad and ends above the Brightside
Waterline.
The next step is to end below the water line.
Below the waterline, I use Intelux Interprotect (Layer 2-3) finished with VC 17m antifouling paints.
(not recommended above under the waterline paint).
Then return the boat and end up (2-3 layers of each primer, and paint and sanding) between each wash.
Post a Comment